3 Uses for Scanning Technology in Anthropology

Nondestructive testing

Anthropologists make a living by trying to figure things out via exploration of cultures. To do this, they may participate in expeditions and excavations in order to gather evidence from which to draw conclusions.


Wall Thickness Analysis


When searching though certain places, anthropologists must make on-site decisions on how to proceed with an excavation. A digital x-ray to determine wall thickness may aid in making those decisions. It can help to determine whether or not proceeding is a good idea based on results. Technology from scanning services such as digital x-rays can aid them in these quests. Read on for more information on how!


3d Imaging


Technology such as 3d imaging is used in a range of industries. For example, focal spot sizes smaller than 1 mm are used in the automotive industry, while focal spots below 0.4 mm are used in aerospace and welding. Resolution sizes also range depending on industry. They correspond to pixel sizes and pixel sizes relate back to spatial resolution. In addition, Resolutions over 2.88 line pairs per mm are considered essential to accuracy when doing a characteristic analysis for displaced fractures. This technology can be changed to fit so many applications, and its uses are only growing.


3d Inspection Software


A 3d inspection scanner allows you to see where you may have potential obstacles and what the best course of action is to unearth what you’re searching for. You can see exactly what you’re doing at all times without having to worry about something going wrong that could potentially damage your efforts. While 3d laser scanners are even more beneficial, they may not be a good fit for this particular function as they may damage artifacts.


Have you seen it used in any of these ways in the anthropology field? Did you realize this technology could help this much?

Leave a Reply